SciELO - Scientific Electronic Library Online

 
vol.88 número219Thermal time in nitrogen and boron application on irrigated Mombaça grass “Guinea grass”Pressure and pressure derivative interpretation of a well in a completed-perforated multilayer reservoir with crossflow índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183

Resumo

SANABRIA-ROJAS, Jeimy C.; BARRERA-LEGUIZAMON, Daniel M.  e  BAUTISTA-LOPEZ, Diego A.. Design and implementation of a CSI inverter with unipolar SPWM modulation and PR controller for lineal loads. Dyna rev.fac.nac.minas [online]. 2021, vol.88, n.219, pp.85-93.  Epub 14-Mar-2022. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v88n219.93100.

This paper presents a detailed implementation of a current source inverter using unipolar sinusoidal pulse width modulation. This method is uncommon in these types of inverters and the semiconductor devices, integrated circuits, sensors, and filters used in conjunction with the TMS320F28379D microcontroller will be discussed. The inverter was tested in both an open and closed loop with a proportional resonant controller. Satisfactory results in terms of the harmonic distortion factor at the voltage output and the regulation indices for lineal loads were obtained. The response circuit demonstrated its viability for the subsequent connection to an electrical distribution network.

Palavras-chave : CSI; implementation; inverter; proportional-resonant controller; unipolar; SPWM modulation.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )