SciELO - Scientific Electronic Library Online

 
vol.24 número1EXPLORING STUDY ON THE VINASSE TREATMENT BY SOLAR PHOTOCATALYSIS WITH TITANIUM DIOXIDE IN A FALLING FILM REACTOREFFECT OF THE PRESENCE OF CHLORINE IN Pd/γ-Al2O3 CATALYSTS ON THE DIBENZOTIOPHENE HYDRODESULFURIZATION REACTION índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista ION

versão impressa ISSN 0120-100X

Resumo

PENA BALLESTEROS, DARIO YESID; VASQUEZ QUINTERO, CUSTODIO  e  ESTUPINAN DURAN, HUGO. CORROSION OF PARTS OF VEHICLES MANUFACTURED WITH BRASS AND BRASS EXPOSED BIOETHANOL-GASOLINE BLENDS. Rev. ion [online]. 2011, vol.24, n.1, pp.43-52. ISSN 0120-100X.

In recent decades, there have been many research on the use of ethanol as a biofuel, where several secondary effects were detected, including corrosion processes on parts exposed to bioethanol-gasoline blend. This study examines the corrosion phenomena occurring when brass and bronze materials commonly found in vehicle parts were exposed to the blends. The research was conducted by static immersion tests of ethanol-gasoline blends at 5, 10, 15, 20 and 100% v of bioethanol and a temperature of 25°C. The corrosion behavior was evaluated using the method of weight loss and electrochemical techniques, Electrochemical Impedance Spectroscopy and Tafel curves. The stability of the layers formed during the exposure time and its influence on the corrosion rate were determined and calculated.

Palavras-chave : EIS; corrosion rate; biofuel; electrochemical.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )