SciELO - Scientific Electronic Library Online

 
vol.25 issue3Extracting ECG signal characteristics based on non-linear transformations and waveletsApplying optimisation techniques for validating a numeric model of free aquifers author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Ingeniería e Investigación

Print version ISSN 0120-5609

Abstract

SANCHEZ R., Claudia Marcela  and  CORTES R., Carlos Julio. Concepts of design for manufacturing (DFM) of lost wax parts. Ing. Investig. [online]. 2005, vol.25, n.3, pp.49-60. ISSN 0120-5609.

Integrated Product Design uses several methodologies, Design for Manufacturing is one of them. DFM pretends to facilitate manufacturing of parts by means of analysis of geometries, values and tolerances, and is used in first design stages in order to decrease the product cost. The design for manufacturing was studied as well as design rules to propose a methodology for Design for Investment Casting.

Keywords : design for manufacturing; lost wax process (investment casting).

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License