Resumen

RESTREPO-GIRON, A.D. Enhanced method for flaws depth estimation in CFRP slabs from FDTC thermal contrast sequences. Ing. Investig. [online]. 2015, vol.35, n.3, pp.61-68. ISSN 0120-5609.  https://doi.org/10.15446/ing.investig.v35n3.50552.

After the detection of internal defects in materials, the characterization of these plays a decisive role in order to establish the severity of these flaws. Finite difference thermal contrast (FDTC) is a new technique proposed recently for contrast enhancement in sequences of thermal images in order to allow the detection of internal flaws in composite slabs with greater probability of success. Besides FDTC, a criterion was also conceived for the estimation of the depth of the detected defects, which brings good results for shallow and strong contrast defects, but poor estimations for deeper and weaker defects. Considering this problem, a revision of the original criterion is carried out in this paper to define a new and robust criterion for estimating the depth of defects, applied after FDTC enhancement and flaws detection. Results of the execution of the revised algorithm on a synthetized thermal sequence from an artificial CFRP slab (using ThermoCalc6L software) show a better performance of the estimation task, reducing the average relative error by more than half.

Palabras clave : Pulsed thermography; composite materials; thermal contrast; FDTC.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )