SciELO - Scientific Electronic Library Online

 
 número75Método para la estimación paramétrica de máquinas de inducción utilizando medidas de tensiones y corrientes instantáneasDesempeño de un Algoritmo Genético aplicado a diseño robusto en sistemas multiobjetivo bajo diferentes niveles de fraccionamiento índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Revista Facultad de Ingeniería Universidad de Antioquia

versión impresa ISSN 0120-6230

Resumen

ORTIZ-VALENCIA, Paula Andrea; TREJOS-GRISALES, Luz Adriana  y  RAMOS-PAJA, Carlos Andrés. Maximum power point tracking in PV systems based on adaptive control and sliding mode control. Rev.fac.ing.univ. Antioquia [online]. 2015, n.75, pp.69-76. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.n75a08.

Photovoltaic (PV) systems are commonly controlled using PI or PID structures, which cannot ensure global stability and a constant settling time. Therefore, the optimization algorithms, e.g. Perturb and Observe (P&O), are designed using the highest settling time in the operating range, which produces a slow tracking of the maximum power point (MPP) for the largest part of the operation range, introducing dynamic power losses to the system. This paper proposes to combine an adaptive controller and a sliding mode current controller (SMCC) to guarantee global stability and a constant settling time for any operation condition, which enable to increase the generated power in comparison with PI and PID controllers. The SMCC enables to mitigate the system perturbations and guarantee global stability, while the adaptive controller defines the reference of the SMCC to ensure a constant settling time. The design of the new control structure is supported by mathematical analyses and simulations made in Matlab®, where the robustness of the system is validated.

Palabras clave : photovoltaic system; maximum power point; adaptive controller; sliding mode current controller.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )