SciELO - Scientific Electronic Library Online

 
vol.32 número63Geração automática de resumos extrativos para um único documento: Um Mapeamento Sistemático índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería

versão impressa ISSN 0121-1129versão On-line ISSN 2357-5328

Resumo

HERNANDEZ-CARRILLO, Rodrigo  e  BELTRAN-CALVO, Gloria-Inés. Rock Wedge Stability Analysis by a Level III Reliability Method. Rev. Fac. ing. [online]. 2023, vol.32, n.63, pp.8-8.  Epub 11-Jul-2023. ISSN 0121-1129.  https://doi.org/10.19053/01211129.v32.n63.2023.14768.

In fractured rock masses, discontinuities control the mechanical response of rock slopes. They even define the geometry of a potential failure, known a kinematically controlled failure. Hence, a proper characterization and description are needed to assess their stability. Accordingly, in this work, a reliability assessment of rock wedges' stability was performed by a Monte Carlo simulation. The orientation of discontinuities was modeled as a random variable that follows the rotationally symmetric Fisher distribution. We developed an algorithm to define the modes of failure based on the orientation of planes, which was articulated within a methodology to compute the factor of safety of rock wedges explicitly. The algorithm systematically defines a set-up of joint planes. Then it verifies the relative location of the slope orientation on that set-up, which is related to the mode of failure of the rock wedge. The proposed algorithm was validated by comparison against commercial software; both yielded the same results. Besides, the probability of failure and the factor of safety probability function of removable wedges were computed for different concentration parameters. Reliability assessment showed the importance of properly characterizing the variability of joint orientation since the concentration highly influences the computed probability of failure. In addition, a proper definition of removable wedges by kinematic analysis is required before computing the factor of safety because many combinations of planes do not lead to unstable wedges, which reduces the probability of failure. Otherwise, it is overestimated. Finally, we recommend further work on rock wedge reliability assessment involving rotational nonsymmetric distribution.

Palavras-chave : Fisher distribution; kinetic analysis; kinematic analysis; Monte Carlo simulation; reliability assessment; rock wedge.

        · resumo em Português | Espanhol     · texto em Inglês     · Inglês ( pdf )