Abstract

ESCALANTE, Alejandro; FLOREZ GARCIA, Luis Carlos  and  HIGUERA COBOS, Oscar Fabián. Cosmosfloworks design of an experimental duct for measurement of the drop in air pressure after its passage through metal trays. Rev. ing. univ. Medellín [online]. 2009, vol.8, n.15, suppl.1, pp.121-132. ISSN 1692-3324.

The following article presents the development’s process of designing an experimental duct which facilitates the measurement of the drop in air pressure after its going through metal trays. The design is based on the results of simulations conducted at various provisions of the duct, and validation of data from the most representative simulation through actual prototype with the same distribution. For this study, we used [1], with which curves of fluid and pressure drop of the fluid were analyzed.

Keywords : duct; losses; friction; simulation; cosmosfloworks; air flow.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )