| | Table of contents
TecnoL. vol.20 no.39 Medellín May/Aug. 2017  Editorial | | | | | | · Reconciliación social: tecnología para la construcción de paz
Alzate, Mónica
| | | | | Scientific and technological research paper | | | | | | · Big Data: an exploration of research, technologies and application cases
Hernández-Leal, Emilcy J.; Duque-Méndez, Néstor D.; Moreno-Cadavid, Julián
| | | | | | · A design methodology of microgrids for non-interconnected zones of Colombia
Garzón-Hidalgo, Juan D.; Saavedra-Montes, Andrés J.
| | | | | | · Fuzzy control of an inverted pendulum Driven by a reaction wheel using a trajectory tracking scheme
Correa-Ramírez, Víctor Daniel; Giraldo-Buitrago, Didier; Escobar-Mejía, Andrés
| | | | | | · Design and construction of a hybrid system of heating air by combustion of biomass and solar radiation, using phase change material (PCM) as a source of thermal storage, for cassava drying
Torres-Gallo, Ramiro; Miranda-Lugo, Pedro J.; Martínez-Padilla, Keimer A.
| | | | | | · Reconfiguration of photovoltaic panels for reducing the hydrogen consumption in fuel cells of hybrid systems
González-Montoya, Daniel; Ramos-Paja, Carlos. A.; Bolaños-Martínez, Freddy; Ramírez-Quiroz, Fabio; Camarillo-Peñaranda, Juan R.; Trejos-Grisales, Adriana
| | | | | | · Dynamic drilling as an alternative method for determining the mechanical behavior of refractories materials
Zuluaga-Castrillón, Daniel; Hernández-Ruiz, Juan F.; Vargas-Galvis, Fabio; López-Gómezz, María E.; Palacio-Espinosa, Claudia C.
| | | | | | · Microfabrication of position reference patterns onto glass microscope slides for high-accurate analysis of dynamic cellular events
Galeano, July A.; Sandoz, Patrick; Zarzycki, Artur; Robert, Laurent; Jaramillo, Juan M.
| | | | | | · Visual in-plane positioning of a Labeled target with subpixel Resolution: basics and application
Sandoz, Patrick; Galeano, July A.; Zarzycki, Artur; Botina, Deivid; Cortés-Mancera, Fabián; Cardona, Andrés; Robert, Laurent
| | | | | | · Fabrication of mems devices - a scanning micro mirror case study
Zarzycki, Artur; Gambin, Wiktor L.; Bargiel, Sylwester; Goreck, Christophe
| | | | | | · Feature relevance estimation for vibration-based condition monitoring of an internal combustion engine
Hernández-Muriel, José Alberto; Álvarez-Meza, Andrés Marino; Echeverry-Correa, Julián David; Orozco-Gutierrez, Álvaro Ángel; Álvarez-López, Mauricio Alexánder
| | | | | | · Analysis of the efficiency of a virtual-optical multiplexing method, by using theta modulation
Valencia, Javier Vargas
| | | | | | · Optimization of non-stationary Stackelberg models using a self-adaptive evolutionary algorithm
Cedeño-Fuentes¹, Olga P.; Arboleda-Castro, Lorena; Jacho-Sánchez, Iván; Novoa-Hernández, Pavel
| | | | | | · Enhancement of nerve structure segmentation by a correntropy-based pre-image approach
Gil-González, J.; Álvarez-Meza, A.; Echeverry-Correa, J.; Orozco-Gutiérrez, A.; Álvarez-López, M.
| | | | | | · Multi-atlas label fusion by using supervised local weighting for brain image segmentation
Cárdenas-Peña, D.; Fernández, E.; Ferrández-Vicente³, José M.; Castellanos-Domínguez, G.
| | | |
|
All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License
pdf